Pinewood Derby Drag Strip

Description

The Pinewood Derby^Â® Drag Strip is a 28 ft., 2-lane track. This Drag Strip is perfect for small groups, test nâ€™ tune, or as a second track to race on during or after a classic Derby Car race. The track is compact, easy to store and light weight.

These pictures are worth a thousand words.
1. The starting gate is one of the 2, 12" plastic track pieces.
2. The tall upright posts are held together with one 12" and one 6" plastic piece.
3. The short posts are held in place with two 6" plastic pieces. Then the short posts are screwed to the middle hole in the second track section.
4. The first 3, 40" long track sections, which are all numbered for you, are bolted together. The rest of the track just nests together with no bolts. Overlap each section about 3".
The lanes are 2 3/4" wide. Any standard Pinewood Racer will fit.

Just set the starting area of the track on a table top.That will make the starting line 42" off the ground. You are now ready to race your Cars.

Stop the cars at the end of the track, with a towel, jacket, blanket, sweatshirt, "any ol thing".

The track comes in a 6"x6"x43" box that may be used to store the track.

We usually ship in 5-10 business days. The tracks are custom made.

/!\ WARNING-CHOKING HAZARD! Not for children under 3 years old.